Technical Highlights

StopShot was designed for people who want to take high speed pictures - not design electronics.

Features:

• 4x20 LCD Display with adjustable blue backlighting.
• Fully programmable 3 channel intervalometer.
• Ten presets - Save up to ten diffent setups and recall them as needed.
• Switchable sensor power (fully configurable) to keep laser light out of your cross beam photos.
• Ballistics mode for easily capturing high speed projectiles.
• Sequential mode timeout for taking pictures with and unattended camera.
• Extremely flexible triggering for cross beam sensors allowing conditional triggering.
• Timers can be adjusted to be manual (on button press), sequential, or event based.
• Blanking Time - Timers can be configured to ignore trigger events for a programmable amount of time.
• Auto Increment - A programmable auto increment time increases trigger delay for every event.
• StopShot can measure flash durations up to 3mS.
• Module can be set up to keep shutter open for a configurable amount of time (up to 24hrs).
• StopShot will save your settings between power cycles. No lost setup info.
• Microphone Input for standard electret microphone.
• Input sensor jack with external power for IR LED's, Lasers or other 5Vdc loads.
• Simple 4 button interface.
• All outputs short circuit protected.
• Outputs capable of energizing relays or electronic valves (Outputs are protected from inductive loads).
• Adjustable gain for microphone and sensor inputs.
• Accepts DC Input 2.1mm power jack.
• Standard 3.5mm mic jack.
• RCA output cables (affordable and easy to extend).
• All outputs are open drain (Can be used for flash trigger or shutter trigger).
• Durable extruded aluminum housing.

Owners Manual

Electrical Specification Summary